XEROX WORKCENTRE C2424 PS DRIVER DOWNLOAD (2019)

XEROX WORKCENTRE C2424 PS DRIVER DETAILS:

Type: Driver
File Name: xerox_workcentre_40400.zip
File Size: 10.3 MB
Rating:
3.85
71 (3.85)
Downloads: 54
Supported systems: Windows XP (32/64-bit), Windows Vista, Windows 7, Windows 8.1, Windows 10
Price: Free* (*Free Registration Required)

Download Now
XEROX WORKCENTRE C2424 PS DRIVER



Using its jet nozzles jets for each primary colorwith a horizontal motion of slightly less than 5 mm 0. The printhead provides one xerox workcentre c2424 ps ink drop that it uses for all print-quality modes.

XEROX WORKCENTRE C2424 PS DRIVER

Jet Stack Head Driver Board. Ink Cyan. Channels formed by the stacked plates route ink past the individual, piezo-electric crystal-driven diaphragms, which force the ink xerox workcentre c2424 ps droplets out the corresponding nozzles. During the printing process, the printhead would only have to travel approximately 14 pixels horizontally to provide complete coverage.

However, the printhead travels much further, depending on print resolution, to interlace each jet with the output of neighboring jets. The reservoir supplies the molten ink to the jet array.

Xerox Workcenter C - Error 39, ?! FixYourOwnPrinter

Heaters in the reservoir and the jet array maintain the ink at a temperature of about o C for printing. Drum s X-Axis or lateral movement of the printhead is accomplished using a stepper motor driving a fine-thread screw system. The printhead, mounted xerox workcentre c2424 ps the X-Axis shaft, moves laterally across the surface of the drum. To find the printhead home position, the X-Axis system drives the printhead in an open-loop. The printhead is driven against the left printer frame for a few seconds, and then reversed a set distance.

Printer: Xerox WorkCentre C OpenPrinting - The Linux Foundation

Standby position Xerox workcentre c2424 ps position 0 degrees : the printhead is forward and resting against the right and left head-to-drum buttons. The head-to-drum buttons define the space between the jet stack and the drum. The tilt cam tilts the head into the basic four positions listed above. The cam has five special features and associated functions: 1.

  • Drivers for Xerox WorkCentre C PS
  • Xerox WorkCentre C PS - Free download and software reviews - CNET
  • Xerox WorkCentre C a first look ZDNet
  • Xerox WorkCentre C2424/ADP
  • Xerox Workcentre C2424 Driver Download :
  • Xerox WorkCentre C2424 PS Drivers

The cam is combined with a missing tooth gear that allows the cam to be inactive in the print position. This frees the process drive to perform other printer operations. The cam has a latching feature to unlatch and latch the missing tooth gear to engage the printhead tilt drive train. xerox workcentre c2424 ps

The cam profile has a standby dwell the portion of the cam that has a constant radius. This holds the printhead back in the standby position 4. The cam profile has a xerox workcentre c2424 ps dwell that holds the printhead back in the wipe position. The cam profile increases the power consumption at a specific phase of rotation.

This allows the software to identify a xerox workcentre c2424 ps consumption footprint to alert the system when the head is locked in error. The printhead is tilted away from the drum and locked for shipping. The printhead is locked if the green head lock indicator is above the level of the tray.

When the printhead is locked in the shipping position there are three key restraining elements: 1. The printhead is restrained from rotating from the shipping position by pins extending from both ends of the printhead into a pocket.

XEROX WORKCENTRE C2424 PS DRIVERS FOR WINDOWS 8

These pockets are defined by dampening pads that xerox workcentre c2424 ps motion to the back and polycarbonate locks that pivot into the lock position and limit forward motion toward the drum. The locks are held in the lock position by the wiper carriage, and are spring-loaded to normally be unlocked.

The printhead is restrained at the X-Axis shafts by the right and left head restraints that limit motion at both ends of the printhead. The printhead is limited to the nominal motion of 1. DM Cam Gear Printhead. Tilt Gear Engaged Tilt Gear s In the print xerox workcentre c2424 ps 0 degreesthe printhead is forward and resting against the right and left head-to-drum buttons. When the process drive is activated, it drives the drum maintenance camshaft to engage the tilt gear train. The tilt cam tilts the printhead into the print position. The cam is combined with a missing tooth xerox workcentre c2424 ps that allows the cam to be inactive in the print position, freeing the process drive to perform other printer operations.

WorkCentre C2424 Support & Drivers

The cam has a latching mechanism to unlatch and latch the missing tooth gear to engage the printhead tilt drive train. A leaf spring applies constant pressure to engage the gear when the latching mechanism is released.

The arm of the latching mechanism is inside the frame; the rest is visible, outside the frame.Product downloads for WorkCentre C WorkCentre C Support & Drivers Web-based PostScript Print and Scan Driver Installer. PostScript; Scan. Windows /XP/03/08/Vista/Windows 7 Xerox workcentre c2424 ps bit driver files for the Xerox WorkCentre C This driver uses the Add Printer Wizard and offers full .

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *