Type: Driver
File Name:
File Size: 27.4 MB
85 (3.06)
Downloads: 50
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP, Other
Price: Free* (*Free Registration Required)

Download Now

Ships from and sold by Shop-The-World.

Biostar P4TSV, Socket 478, Intel Motherboard

This fits your. Product details Delivery Restrictions: Visit the Delivery Destinations Help page to see where this item can be delivered. Supports USB Function. Biostar p4tsv open Jumper close Pin close CPU Installation Step1: Pull the lever sideway s away from the socket and then raise the lev er up to a degree angle. The CPU will f it only in the correct orientation.


Step3: Hold the CPU down f irmly, and then close the lever to complete the biostar p4tsv. This completes the installation. For more dual channel operation information please log on: www.

Biostar P4TSV - motherboard - micro ATX - Socket 478 - i865G Specs

Unlock a DIMM slot by pressing the retaining clips outward. This connector biostar p4tsv the prov ided f loppy drive ribbon cables. The IDE connectors can connect a master and a slave driv e, so you can connect up to f our hard disk driv es. The f irst hard drive should alway s be connected to IDE1. Biostar p4tsv PCI slot is designated as 32 bits. Remov e AC power line. Wait for fiv e seconds. Power on the AC.


Reset y our desired password biostar p4tsv clear the CMOS data. Soporta procesador Intel Pentium 4 de hasta 3. Soporta Biostar p4tsv. Banda ancha disponible hasta 3. Soporta solamente dispositivos DDR x8, x Interf ace Low Pin Count. Serial ATA Processor Max Supported Qty. Installed Qty. Audio Audio Codec. Compliant Standards. AC ' Suspend Mode When enabled and after the set time of system inactivity, all devices except the CPU will be shut off.

HDD Power Down When enabled and after the set time of system inactivity, the biostar p4tsv disk drive will be powered down while all other devices remain active. Intruder Detection This item allows you to enable or disable intruder detection. The Choices: Disabled DefaultEnabled. biostar p4tsv

Debian HCL - Biostar / P4TSV (ver )

The Biostar p4tsv Enabled, Disabled default. Resume by Alarm This function is for setting date and time for your computer to boot up. During Disabled, you cannot use this function.

During Enabled, Choose the Date and Time. Alarm: Date of Month Alarm You can choose which month the system will boot up. Time hh:mm:ss Alarm You can choose shat hour, minute and second the system will boot biostar p4tsv.

BIOSTAR P4TSV Intel G Micro ATX Intel Motherboard -

Note: If you have change the setting, you must let the system boot up until it goes to the operating system, before this function will work. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings. Every peripheral device has a node, which is called ESCD. This node records which resources are assigned to it. The system needs to record and update ESCD to the memory locations. IRQ Resources This submenu will allow you to assign each system interrupt a type, depending on the type of device using the interrupt. Some graphic controllers which are not VGA compatible take the output biostar p4tsv a VGA controller and map it to their display as a way to provide boot information and VGA compatibility.

However, the color information biostar p4tsv from the VGA controller is drawn from the palette table inside the VGA controller to generate the proper colors, and the graphic controller needs to know what is in the palette of the VGA controller. Unless you have the above situation, you should disable this option.BIOSTAR P4TSV is powered by the Intel G/ICH5 chipset.

This micro-ATX motherboard features 4DIMMs for Biostar p4tsv DDR SDRAM, MHz FSB, 3PCI. P4TSV Ver. 7.x.

Socket: Ver.7.x. Socket ; Supports Intel Pentium 4/ Celeron Processor; Supports FSB /MHz; Biostar p4tsv Intel Hyper-Threading.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *